09 เม.ย.

Posted at 14:23h in fan-information
0 Likes

Teral fan CLF6-RS Sirocco Fan: Single suction double-supported belt drive typeProduct DescriptionHigh efficiency type that demonstrates great performance with less power.The optimum selection can be made frequently by increasing the rotation speed.Easy installation with compact design as much as possible.Sufficient performance is demonstrated at low speeds, and at the same time noise generation is suppressed.UseFor general of transmission and exhaust airAir-conditioning ventilationFor air supply and exhaustFor air conditioningHandling Fluid : AirFluid Temperature : 0 ~40°C CATALOGUE AND SPECIFICATION Catalogue and Specification Model : CLF6-RS ...

04 เม.ย.

Posted at 16:07h in pump-information
0 Likes

CENTRIFUGAL PUMP SJM2&3 Features: Compact and light weight design with 2 poles motor: Performance covering wide range as much as a heavy duty pump: Minimum space required and easy installation: Back pull out structure, which ensures eay of assembly, reassembly and maintenance with our removal from the pipeApplication: General Water Supply in dwelling houses,city buildings,etc : Circulation of cold and/or hot water: Water supply unit ,Booster pump: Irrigation: SprinklerSpecificationLiquid : Fresh Water (0-80°C)Max Suction Pressure : -6kgf/cm2Revolution speed : 3000 rpm / 3600 rpmStructureImpeller : ClosedSealing : Mechanical SealBearing : Sealed Ball Bearing(Motor)MaterialImpeller : Bronze (CAC406)Shaft : Stainless steel (SUS304Casing : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : SJM2&3 50 Hz Catalogue and Specification Model : SJM2&3 60 Hz ...

04 เม.ย.

Posted at 15:49h in pump-information
0 Likes

CENTRIFUGAL PUMP SJ4 FeaturesBack-Pull-Out design: This back-pull-out construction ensures easy disassembling without removing suction and discharge pipes. So the maintenance is very easy Conformable to JISCompact-Stability-Non overloadfor any discharge capacityConformable to JIS: JIS standard(JISB8313) is established in Japan by referring internal standard ISO2858Application: General Water Supply in dwelling houses,city buildings,etc : Circulation of cold and/or hot water: Industrial use: Irrigation and sprinkler: Water systemSpecificationLiquid : Fresh Water (0-80°C)Max Suction Pressure : -6kgf/cm2 or (10.2kgfcm2-(shutoff head/10))Revolution speed : 1500 rpm / 1800 rpmStructureImpeller : ClosedSealing : Mechanical Seal , Gland PackingBearing : Sealed Ball BearingMaterialImpeller : Cast iron (FC200) and Stainless casting (SCS13)Shaft : Stainless steel (SUS403)Casing : Cast iron (FC200)Common Base : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : SJ4 50 Hz Catalogue and Specification Model : SJ4 60 Hz ...

04 เม.ย.

Posted at 15:38h in pump-information
0 Likes

CENTRIFUGAL PUMP LP FeaturesInline: As the pump of in-line type can be installed as a part of the pipe, no floor space for installation is requiredFree Direction: The pump of this model can be installed vertically or horizontallyEasy Maintenance: The pump can be disassembled without disconnecting the pipe.it is easy to inspect and repair the pumpApplication: Hot water supply: In-line booster: Circulation of cooling: General Water Supply in dwelling houses,city buildings,etc: Circulation of cold and/or hot waterSpecificationLiquid : Fresh Water (0-80°C) but for Type 0-100°CMax Suction Pressure : -6kgf/cm2Revolution speed : 3000 rpm / 3600 rpmStructureImpeller : ClosedSealing : Mechanical SealBearing : Sealed Ball Bearing(Motor)MaterialImpeller : Bronze (CAC406)Shaft : Stainless steel (SUS304)Casing : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : LP 50 Hz Catalogue and Specification Model : LP 60 Hz ...

28 มี.ค.

Posted at 13:35h in pump-information
0 Likes

CENTRIFUGAL PUMP SJ FeaturesBack-Pull-Out design: This back-pull-out construction ensures easy disassembling without removing suction and discharge pipes. So the maintenance is very easyCompact-Stability-Non overloadfor any discharge capacityConformable to JIS: JIS standard(JISB8313) is established in Japan by referring internal standard ISO2858Application: General Water Supply in dwelling houses,city buildings,etc : Circulation of cold and/or hot water: Industrial use: Irrigation and sprinkler: Fire fighting facilitiesSpecificationLiquid : Fresh Water (0-80°C)Max Suction Pressure : -6kgf/cm2 or (10.2kgfcm2-(shutoff head/10))Revolution speed : 3000 rpm / 3600 rpmStructureImpeller : ClosedSealing : Mechanical Seal , Gland PackingBearing : Sealed Ball BearingMaterialImpeller : Bronze (CAC406)Shaft : Stainless steel (SUS403)Casing : Cast iron (FC200)Common Base : Cast iron (FC200) CATALOGUE AND SPECIFICATION Catalogue and Specification Model : SJ 50 Hz Catalogue and Specification Model : SJ 60 Hz ...